SUPPORT FOR ELECTRICIANS
Here you can find answers to the most frequently asked questions from electricians delivering and installing stove guards from EFP. If you belong in another category, please consult another support page.
Frequently Asked Questions
This may be due to a bad battery. Change the battery in the sensor.
Ensure that the plug is appropriately fixed to the switch unit.
The stove guard is programmed to cut the power upon the end of a timer. Press the sensor button once to reactivate the system
It is important to press the button when the sensor emits a steady light in the chosen menu. The pressing has to happen relatively quickly, as the setting phase remains active for approximately 6 sseconds. Verify that the following beeps match the number of presses performed
The sensor has cut the power to the stove/hob as a result of high temperatures. Press and hold the button on the sensor until the light changes from green to red. Release as the light becomes red, and the power reconnects to the stove/hob.
The sensor indicates that the battery is about to run out of power.Order a new battery here , if you have a stove guard with a special battery (Lithium 3.6V)
Instruction manuals
Download instruction manual here (PDF)
UWSG-2s Universal wireless stove guard, 1.5V
UWSG-2tr, Wireless stove guard with electric CR5 sensor and switch unit, 1-phase
UCSG-2, Universal Wired Stove Guard
